Hard elastic polypropylene is formed by crystallized under strain and annealing.

硬彈性聚丙烯是在應變結晶和熱結晶兩個復合過程中形成的.

互聯網

The suitable recovery strain annealing temperature was 500 ℃.

適宜的回復應變退火溫度為500℃.

互聯網

To optimize sub - job assignments, two simplified algorithms of simulated annealing are proposed.

為優化子作業指派, 提出了兩個簡化的仿真退火算法.

互聯網

Annealing: Heating to 780 ~820 Holding time 1 ~3 h, Colding in furnace.

退火: 加熱至780～820℃,在此溫度停留1～3小時, 在爐中冷卻.

互聯網

Braising , boiling, annealing, setbacks and struggling all necessary processes of shaping.

燉 、 熬 、 磨練 、 挫折、掙扎,這些都是成長必經的過程.

互聯網

Annealing: Heating to 820 ~870 Holding time 1 ~3 h, Colding in furnace.

退火: 加熱至820～870℃,在此溫度停留1～3小時, 在爐中冷卻.

互聯網

Annealing: Heating to 710 ~740 Holding time 1 ~3 h, Colding in furnace.

退火: 加熱至710～740℃,在此溫度停留1～3小時, 在爐中冷卻.

互聯網

The microstructures of Cu - Zn powder under different annealing conditions were studied.

研究了銅鋅粉末在不同退火工藝下的顯微組織變化.

互聯網

Annealing: Heating to 800 ~880 Holding time 1 ~3 h, Colding in furnace.

退火: 加熱至800～880℃,在此溫度停留1～3小時, 在爐中冷卻.

互聯網

Annealing: Heating to 740 ~770 Holding time 1 ~3 h, Colding in furnace.

退火: 加熱至740～770℃,在此溫度停留1～3小時, 在爐中冷卻.

互聯網

In the paper, the structure of morden continuous annealing furnace was introduced.

文章介紹了現代用于冷軋不銹帶鋼生產的連續退火爐的組成及結構.

互聯網

The purpose of annealing the metal is to relieve the stress.

給金屬退火是為了減少一些應力.

互聯網

In addition, this kind of material could be machined after annealing treatment.

且該材質具有退火后可切削加工的性能.

互聯網

Annealing: Heating to 400 ~650 Holding time 1 ~3 h, Colding in furnace.

退火: 加熱至400～650℃,在此溫度停留1～3小時, 在爐中冷卻.

互聯網

One two - speed annealing furnace Glassware, Kao Hua furnace, favored by the industry.

其中雙速玻璃制品退火爐 、 烤花爐, 深受同行業青睞.

互聯網