Study on relationship of viscosity and shear rate of potato starch size;

馬鈴薯淀粉漿料的粘度與剪切速率關系的研究

Experimental investigation of the apparent viscosity and the shear rate of gelled propellant in straight round pipe;

凝膠推進劑直圓管中剪切速率與表觀粘性實驗研究

Impact of shear rate on microstructure of PA 6/PP blends

剪切速率對PA 6/PP共混物微觀結構的影響

The experimental results show that the apparent viscosity of semi-solid A356 alloy increases with increasing the fraction solid, but decreases with increasing the shearing rate in the steady-state.

結果表明：半固態A356合金的穩態表觀粘度(η_a)隨著固相分?jǐn)?shù)(f_s)的增加而增加,但隨剪切速率(γ)的增大而減小,當f_s達到某一臨界值之后,η_a迅速增加,可用方程η_a=2。

The influence of molecular weight, shearing rate and temperature on the rheologic behavior of domestically manufacturing linear PPS (i.

以國產線性聚苯硫醚樹脂為原料,研究了分子質量、剪切速率、溫度對PPS樹脂流變行為的影響。

The diameter, flow, shearing rate ,draw ratio and pressure difference were calculated.

討論了"┃·"異形噴絲板的設計、紡絲工藝及后加工工藝,計算出噴絲板毛細孔的當量直徑、單孔流量、剪切速率、噴絲頭拉伸比,驗證了噴絲孔的結構參數是影響可紡性的關鍵因素。

Studies on the Mechanics Behaviour of Joints under Different Shearing Velocity;

不同剪切速率下節理的力學特性研究

Study on Melt Viscosity of PP and FEP/PP Blends at Low Shear Rates

PP及FEP/PP低剪切速率下熔體粘性研究

Determination of viscosity of coatings at a high rate of shear

GB/T9751-1988涂料在高剪切速率下粘度的測定

The apparent viscosity at the point decreases distinctly with shear rate increasing.

隨著剪切速率的增加,轉相點的視粘度明顯下降.

Effects of Shear Rate on Mechanical Behavior of Structured Loess

剪切速率對結構性黃土力學性狀的影響

Impact of shear rate on microstructure of PA 6/PP blends

剪切速率對PA 6/PP共混物微觀結構的影響

A STUDY OF RHEOLOGICAL PROPERTIES OF MOLTEN POLYETHYLENE TEREPHTHALATE--Part Ⅱ:Rheological Properties of PET Melt at High Shear Rate

聚酯熔體流變性能的研究——高剪切速率下熔體的流變性能

INFLUENCE OF SILICA NANOPARTICLES ON THE COALESCENCE OF IMMISCIBLE PDMS/PIB BLENDS UNDER LOW-RATE SHEAR FLOW

納米SiO_2對PDMS/PIB不相容共混物在低剪切速率下凝聚行為的影響

Study on the Law of the Influence of Temperature and Shear Rate on Viscosity of Yanchang Crude Oil

溫度及剪切速率對延長原油粘度的影響規律研究

Research on the Rational Shearing Speed of High-speed Precision Shearing for Metal Bar

金屬棒料高速精密剪切適宜剪切速度的研究

Adiabatic Shear Bands of 4Cr5MoSiV1 Steel Formed by High Speed Cutting

高速切削4Cr5MoSiV1鋼形成的絕熱剪切帶

Formation mechanism and elimination of heavy sparks with the 3~# high-speed flying shear

3號飛剪高速剪切大火花的成因及解決辦法

Cause Analysis of Big Spark of Motor of Flying Shear at High Speed Cutting and Its Countermeasures

飛剪高速剪切時大火花的成因及解決辦法

The ratio of the magnitude of an applied shear stress to the velocity gradient that it produces; that is, a measure of a noncrystalline material's resistance to permanent deformation.

剪切應力數值與其產生應變速率的比值叫粘性，用來衡量非晶材料抵抗永久變形的能力。

Research on spatial simulation method of soil equivalent shear wave velocity

土層等效剪切波速空間模擬方法研究

The adiabatic shear bands of U-5.7Nb at high strain rate

高應變率下U-5.7Nb合金的絕熱剪切變形

Research on Rational Shearing Temperature of High Speed Precision Shearing for Bar under Clamping State

基于夾緊狀態的棒料高速精密剪切適宜剪切溫度的研究

Effects of dynamic shear modulus ratio and velocity on surface ground motion and their equivalent relations

動剪切模量比與剪切波速對地震動影響及等量關系研究